Blog

• Decoupage with Decorative Paper.

Materials: Decorative paper, Mod Podge, brush

Instructions: Cut decorative paper to fit the MDF board. Apply a layer of Mod Podge to the board, place the paper on top, and smooth out any bubbles. Apply another layer of Mod Podge over the paper to seal it.

• Stenciling

Materials: Stencils, acrylic paint, sponge brush

Instructions: Secure the stencil to the MDF board. Dab the sponge brush in paint and apply over the stencil. Carefully remove the stencil to reveal the design.

• Resin Pouring

Materials: Resin, resin pigments, mixing cups, stir sticks

Instructions: Mix resin with pigments. Pour the mixture over the MDF board and tilt to spread. Allow it to cure for a glossy, glass-like finish.

• Fabric Wrapping

Materials: Fabric, fabric glue or staple gun

Instructions: Cut fabric slightly larger than the MDF board. Wrap the fabric around the board and secure it with glue or staples on the back.

• Hand-Painted Designs

Materials: Acrylic paints, fine-tip brushes

Instructions: Sketch a design lightly with a pencil. Use fine-tip brushes to paint the design in layers, allowing each layer to dry before adding details.

• Gold Leaf Application

Materials: Gold leaf sheets, adhesive, brush

Instructions: Apply adhesive to the desired areas of the MDF board. Carefully place gold leaf sheets over the adhesive and brush off the excess for a luxurious look.

• Chalkboard Paint

Materials: Chalkboard paint, brush or roller

Instructions: Apply several coats of chalkboard paint to the MDF board, allowing each coat to dry thoroughly. This transforms the board into a writable surface.

• Acrylic Pour Art

Materials: Acrylic paints, pouring medium, cups, stir sticks

Instructions: Mix acrylic paints with a pouring medium. Pour different colors onto the MDF board and tilt to spread. The colors will blend and create unique patterns.

• 3D Texture with Modeling Paste

Materials: Modeling paste, palette knife, acrylic paint

Instructions: Apply modeling paste to the MDF board using a palette knife to create texture. Once dry, paint over the paste with acrylic paint.

• String Art

Materials: Nails, colored string or embroidery thread

Instructions: Mark points for nails on the MDF board. Hammer nails into the board at marked points. Weave colored string or thread around the nails to create a design.